Tektu Wall Panel

• Dimensions
  Grey: L12" x H12"
  White: L12" x H12"
  Double Sided Tape: D9" x W2"
• Material: PVC
• Finish: Grey, White
• Area: Living Room, Bedroom, Kitchen, Dining Room, Bathroom, Office

NOTE
1 in = 2.54 cm; 1 cm = 0.39 in

General Preparation (For All Installation Types)

Before beginning installation:

• Ensure walls are clean, dry, and smooth
• Remove dust, grease, nails, and flaky paint
• Measure and mark your starting line using a level and pencil
• Lay panels on the floor first to visualize placement and pattern

Recommended Tools

• Tape Measure
• Level
• Pencil or Chalk Line
• Utility Knife or Fine-Tooth Saw
• Clean Cloth
• Caulk Gun (for adhesive installation)
• Rubber Roller (for peel-and-stick panels)
• Brad Nail Gun (for nail installation)
  

Nail Gun Installation

Ideal for: Thicker or heavier panels (wood, MDF)
Requires: Brad nail gun or finish nailer

Step-by-Step

1. Locate wall studs using a stud finder and mark their positions.
2. Start at the bottom corner of the wall.
3. Align the first panel to your guideline.
4. Fasten the panel into studs using a brad nail gun
   Space nails every 12–16 inches
5. Fit subsequent panels tightly and continue fastening.
6. Fill nail holes with wood filler or color-matched putty.
7. Optional: Apply caulk between panels for seamless joints.

Tip: Leave a 1/8" expansion gap at edges when installing wood-based panels.

Peel-and-Stick Installation

Ideal for: Lightweight panels with pre-applied adhesive
Requires: Clean, primed surface and rubber roller

Step-by-Step

1. Wipe the wall clean to remove dust and grease. Allow to dry fully.
2. Measure and draw a level starting line.
3. Peel off the adhesive backing from the first panel.
4. Align carefully and press onto the wall, starting from one edge.
5. Use a rubber roller to apply even pressure across the panel.
6. Continue installing panels tightly edge-to-edge.
   

Tip: Avoid repositioning panels—adhesive bonds strongest on first contact.

Glue-On Installation

Ideal for: Panels without adhesive (solid PVC, composite, acoustic panels)
Requires: Construction adhesive or latex panel glue

Step-by-Step

1. Clean the wall surface thoroughly.
2. Apply adhesive in an “S” or zig-zag pattern on the back of the panel.
3. Align the panel with guide marks and press firmly onto the wall.
4. Use painter’s tape to hold panels in place if necessary.
5. Repeat for remaining panels, ensuring level alignment and consistent spacing.
6. Wipe away any adhesive squeeze-out with a damp cloth.
   

Tip: Allow adhesive to cure for 24–48 hours before applying pressure or weight

• Order Handling Time:
  1–3 business days

• Transit Time:
  14–22 business days after order placement

• Estimated Delivery Time:
  15–25 business days

For full details, please refer to our Shipping Policy

We offer a 30-day return window. Simply contact our support team info@solincollective.com to initiate a return.

Claims submitted after this period may not be eligible for a refund or replacement.