













In stock | Ready to Ship
Zarev Bathroom Faucet
What You’ll Love:
✨ Sleek Angular Silhouette: Clean lines and curated finishes create a bold yet minimalist statement. Designed to elevate contemporary bathrooms with quiet confidence
💧 Calming Waterfall Flow: Wide, gentle stream delivers a smooth, spa-like experience that feels both luxurious and controlled
🛡️ Durable Brass & Steel Build: Crafted from brass and stainless steel for lasting strength, with effortless single-lever control for daily precision
Description
The Zarev Bathroom Faucet is crafted from durable brass and stainless steel, defined by a sleek angular silhouette that reflects modern minimalism. Its refined profile and range of finishes introduce a bold yet composed statement suited to contemporary bathrooms.
Designed with a waterfall spout, Zarev delivers a gentle, wide flow that enhances the overall user experience. The single-handle lever provides smooth and precise control of water temperature and flow, ensuring lasting performance with architectural clarity.
- Dimensions
L5.1" x H5.9" - Material: Bras
- Tap Hole: Single - 1.4"
- GPM (Gallons Per Minute): 2
- Minimum Pressure: 29 Psi
- Medium Pressure: 50 Psi
- Maximum Pressure: 72 Psi
- Thread: G1/2 BSP (British Standard Pipe) - Parallel thread: Suitable for most plumbing systems outside North America. NPT (National Pipe Thread) compatibility available: For North American systems (U.S. and Canada). Adapter may be required for full compatibility.
- Certifications: CE, NSF/ANSI 61 & 372, UPC/cUPC, WaterSense
NOTE
1 in = 2.54 cm; 1 cm = 0.39 in
Details
Mounting Options: This collection includes both wall-mounted and counter-mounted faucets. Check your product's description before beginning installation.
Thread Compatibility:
- G1/2 BSP thread (standard for most systems outside North America)
- NPT-compatible options available for U.S. and Canadian plumbing. Adapter may be required.
Tools You May Need
- Adjustable wrench
- Pipe tape (Teflon tape)
- Basin wrench
- Plumber’s putty or silicone sealant
- Bucket or towel (for water drainage)
- Drill and anchors (for wall-mounted units)
Installation Steps
A. For Wall-Mounted Faucets
Step 1: Turn Off Water Supply
Shut off the hot and cold water valves and open nearby faucets to release residual pressure.
Step 2: Prepare Water Lines
Ensure that wall outlets for hot and cold water align with your faucet’s inlets. Make any plumbing adjustments before mounting.
Step 3: Install Mounting Hardware
Mark and drill holes on the wall. Use provided anchors or screws to mount the support plate.
Step 4: Connect Supply Lines
Wrap threaded pipe connections with plumber’s tape. Attach hot and cold lines securely to the faucet valve inlets.
Step 5: Mount the Faucet Body
Secure the faucet spout and handles onto the mounted base. Use a wrench to tighten connections, do not overtighten.
Step 6: Seal and Finish
Apply silicone sealant around base fittings for waterproof integrity. Let it cure as recommended.
Step 7: Turn On Water and Test
Open the main water valves. Check for leaks and test water temperature control.
B. For Counter-Mounted Faucets
Step 1: Turn Off Water Supply
Shut off both water valves under the sink. Open the faucet to drain any remaining water.
Step 2: Position Faucet and Handles
Insert the faucet spout and handle through the pre-drilled holes on the countertop or sink deck.
Step 3: Secure from Beneath
From below the sink, use mounting nuts and washers to hold the faucet components in place.
Step 4: Connect Water Supply Lines
Use plumber’s tape on all threaded joints. Attach the hot and cold lines to their respective valves using flexible connectors.
Step 5: Seal the Base
Apply plumber’s putty or silicone around the faucet base (if required) to prevent leaks.
Step 6: Turn On Water and Inspect
Restore water supply and test for steady flow, correct temperature, and tight seals.
Important Tips
- Always verify thread compatibility (BSP vs. NPT). Use an adapter where needed.
- If unsure about your plumbing system, consult a licensed plumber.
- Clean aerators periodically for optimal water flow.
- For outdoor wall applications, ensure frost protection in colder climates.
- Order Handling Time:
1–3 business days
- Transit Time:
14–22 business days after order placement
- Estimated Delivery Time:
15–25 business days
For full details, please refer to our Shipping Policy
We offer a 30-day return window. Simply contact our support team info@solincollective.com to initiate a return.
Claims submitted after this period may not be eligible for a refund or replacement.
Choose options














Safe payment on our website
Zarev Bathroom Faucet
Frequently Asked Questions
It is constructed from brass and stainless steel, offering durability and long-term performance.
The faucet measures 5.9 inches × 5.1 inches (15 cm × 13 cm).
It operates within a pressure range of 29 to 72 Psi, with recommended performance at approximately 50 Psi.
The faucet delivers a flow rate of 2 gallons per minute (GPM).
It requires a single tap hole measuring 1.4 inches (3.5 cm).
